Product Name: Plate and frame filter press

Details:

1. Overview:

The TLB(X)AM plate and frame sludge filter press produced by Shandong Tianlang Environmental Protection Technology Co., Ltd. is a pressure-operated pressure filtration device suitable for solid-liquid separation of various suspensions. The plate and frame filter press is a machine that was previously applied to chemical dehydration. The plate and frame filter press generally has a large investment in infrastructure operation and infrastructure equipment. It has the advantages of large filter driving force, high solid content of filter cake, clear filtrate, high solid recovery rate, and low consumption of conditioning chemicals. Wastewater plants are still widely used. The plate and the frame are arranged one on another, and the filter cloth is covered on both sides of the filter plate, and the plate and the frame are pressed by the pressing device, that is, the filter press chamber is formed between the plate and the frame. In the same part of the upper end of the plate and the frame, there is a small hole, which is pressed into a channel, pressurized to 0.2~0.4MPa sludge, and the channel enters the filter press chamber, the surface of the filter plate is engraved with a groove, the lower end A hole for discharging the filtrate is drilled, and the filtrate is discharged under pressure through a filter cloth and along a groove and a channel to discharge the sludge. The plate and frame filter press can withstand higher sludge specific resistance than the vacuum filter, which can reduce the consumption of the conditioner, and can use a cheaper agent (such as FeSO4·7H2O). When the specific resistance of the sludge is 5 × 10 11 to 8 × 10 12 m / kg, it can be directly filtered without pre-conditioning. The mud cake yield and mud cake moisture content of the plate and frame filter press shall be determined based on test data or similar operating experience. The moisture content of the mud cake can generally be 75% to 80%.

2. the type of equipment:

The plate and frame filter press has four forms: manual compression, mechanical compression and hydraulic compression and automatic plate and frame filter press.

The manual pressing is the screw jack pushing the pressing plate to press; the mechanical pressing is the motor with the H-type reduction box, and the pressing plate is pressed by the frame transmission component; the hydraulic pressing is the hydraulic cylinder of the hydraulic station through the frame. The component pushes the pressing plate to be compacted; the control system of the automatic filter press adopts PLC programming control, and the degree of automation is high.

3.the equipment features:

The separation effect is good, the structure is simple, the operation is convenient, safe and reliable, and is widely used in petroleum, chemical, ceramic, dye, pharmaceutical, sugar, food, metallurgy, textile, coal and environmental protection industries.